This is the Retina MacBook Pro 13" ETSI Logic Board for the Touch Bar mid 2017 model only. This logic board consists of a 3.5GHz Core i7 processor chip with 16GB PC3-17000 (2133MHz) integrated ram, and 256GB of integrated flash storage. This logic board has a integrated graphics card, Intel Iris Plus Graphics 650 with 1.5GB of VRAM which is shared with the system.
This logic board will come with a fresh install of 10.12.5 (Sierra) or later.
Please note the following three pieces of information:
These machines have an auto boot feature which must be disabled before any work is carried out on the machine. By default this feature is disabled on all logic boards before they are stripped and will need to be re-enabled once fitted to a machine.
The Touch ID function is linked to the main logic board therefore the Touch ID and power button are sold with the logic board.
This listing is only for the touch bar model which is known as the 4 TBT3 model, this stands for 4 Thunderbolt 3.0 ports. Where as the function key model is known as the 2 TBT3 model, which stands for 2 Thunderbolt 3.0 ports.
This is a highly static-sensitive device and replacement should not be attempted without suitable experience and anti-static precautions. If you remove the heat sink from the logic board, the seal must be re-made adequately when the new board is fitted to ensure the MacBook Pro does not overheat. Thermal paste is available from the Tools section.
Provided with 3month guarantee. No refund will be given for logic boards damaged during fitting.
Condición : Reciclado
Esta es una parte que se usa desde ordenador de reciclado. En el caso de una parte funcional, se ha probado completamente antes de poner en stock y se garantiza que sea completamente funcional. recycled computer.
Números de pieza : 661-07708, 820-00923, HRQ6, HRQ8, HRQC, HRT4, HRT6, HRT8
Garantía : 3 meses
Compatibilidad:
