This is the 13" MacBook Pro Unibody Logic Board for the Early 2011 model, 10.6 version. There are two version of the logic board; the original (10.6) and the revised 10.7 version. These refer to the Mac OS version that will be downloaded and installed if the laptop is forced into internet recovery mode and this is set in the logic board's firmware. This logic board is fully interchangeable with the Late 2011 model of MacBook Pro Unibody. This logic board has a 2.7GHz Intel Core i7 Processor with a integrated graphics card, Intel HD 3000 with 384MB of VRAM. (If 8GB of ram is installed the VRAM will be upgraded to 512MB)
This is a highly static-sensitive device and replacement should not be attempted without suitable experience and anti-static precautions. If you remove the heat sink from the logic board, the seal must be re-made adequately when the new board is fitted to ensure the MacBook Pro does not overheat. Thermal paste is available from the Tools section.
Provided with 3month guarantee. No refund will be given for logic boards damaged during fitting.
Condición : Reciclado
Esta es una parte que se usa desde ordenador de reciclado. En el caso de una parte funcional, se ha probado completamente antes de poner en stock y se garantiza que sea completamente funcional. recycled computer.
Números de pieza : 661-5870, 820-2936, DM6G, DM6H, DM6M, DM6Q, DM6R, DM6V, DM6W, DMLL, DMLN, DMLQ, DMLT, DMLV
Garantía : 3 meses
Compatibilidad:
